welcome,guest
Negotiable
The date of payment from buyers deliver within days
Beijing
Long-term effective
2022-09-21 01:01
237
Company Profile
By certification [File Integrity]
Contact: xiaodou(Mr.)
Email: 
Telephone: 
Phone: 
Area: Beijing
Address: Beijing
Website: http://www.tesmakjs.com/ http://xiaodou.bbydgc.com/
Product Parameter
MODEL |
D1 |
Length X Width X Height |
1920*690*1050mm |
Rated power |
2000 W |
Rated Voltage |
72V |
Recommended battery type |
Lithium battery |
Distributive battery specification |
72V30A |
Max.Speed |
75km/h |
Range |
60km |
Motor type |
Brush-less/hub-motor |
Grade-ability |
15 degree |
Front brake |
disc |
Rear Brake |
disc |
Front tire specification |
120/70-12 |
Rear tire specification |
120/70-12 |
Front wheel hub specification |
2.75-12 |
Rear wheel hub specification |
2.75-12 |
Maximum load |
75kg |
Ground Clearance |
170mm |
20-foot container |
38 units |
40'HC (pcs) |
78 units |
Product Description and Features
The maximum speed can reach 75km/h, the economic cruising range can travel 60km, intelligent lithium battery, super long battery life, liberating mileage worries, high wear-resistant rubber tires, drainage grip, ensuring stable driving, adopting high-strength structure design, thick feel, pattern the design is conducive to water drainage. The non-slip foot pad three-dimensional 3D abrasive is formed at one time, which closely fits the curvature of the body pedal, and the appearance is more unified and complete.
The body is light, the appearance is atmospheric, and the appearance is injection molded, which is beautiful and structural. Large battery capacity to meet long-distance use requirements.
Product Considerations
1: Before installing the battery, check whether there are hard objects in the battery box or whether the battery box is flat.
2: When charging, the charger should be placed on the pedal, and it is strictly prohibited to cover or place it on the cushion, in the bucket.
3: It is not allowed to modify or install the whole vehicle line without permission.
4: Do not use a high-pressure water gun to wash the inside of the electric car to avoid short circuit of the internal circuit.
Product Application Scenarios
Use for commuting
Excursion
shopping
Grocery shopping
Pick up children to and from school
Product Warranty Service
Part Name |
Warranty period |
Warranty coverage |
Liability exemption |
Motor |
1 year |
Parts defects |
Overload, flooding, bearing |
Controller |
1 year |
Parts defects |
Damaged outer casing and extension line sheath |
Front/rear suspension |
1 year |
Parts defects |
Slippery screws, rolling keys, brake drums, wear |
Frame |
1 year |
Parts defects |
Deformed by external force and damaged spray coating |
Steering system |
1 year |
Parts defects |
Ball head, universal joint wear |
Braking system |
1 year |
Parts defects |
The aging of the plunger cup of the pump cavity, the parking cable |
Damping system |
1 year |
Parts defects |
Abrasion and aging of the installation dispensing sleeve |
Electrical parts |
6 months |
Parts defects |
Product Production Process
Assembly process | |
Department outfit |
Install tires |
Balance and drive component assembly |
Left and right rear flat fork installation, rear wheel, differential, motor installation |
Steering and support assembly |
Steering front axle, leaf spring, flexible connecting plate, leaf spring rubber sleeve, steering gear installation, calipers, toe pre-adjustment, steering angle adjustment |
Exterior parts and display device assembly |
Covers and lamps |
Instrument panel and switch | |
Structure assembly |
Frame access, frame, nameplate coding, GPS installation, filling in transfer card |
Steering mechanism (steering column, lower tube column, corner device, steering link, steering rod joint) and frame installation | |
Braking mechanism (brake pedal, master cylinder, tee and oil pipe) and frame installation | |
Installation of steering front axle sub-assembly, front wheel, roof rod and frame | |
Rear wheel sub-assembly, rear shock absorber, rear fender and frame installation | |
Electrical and auxiliary structure installation |
Controller, converter, charger, reversing horn, headlight, horn, oil reservoir and hose |
Crane upper assembly line | |
Add brake fluid | |
Wiring harness laying and bundling, wiring harness and electrical device plugging | |
Instrument panel sub-assembly, rear left and right side panels, rear floor, rear left and right floor, left and right foot pedals, rear panel, seat | |
Battery installation and connection | |
Installation of front left and right mudguards, bamboo plywood and front wall | |
All lamps and wiring harness plugging, electrical inspection | |
Installation of front left and right side panels, bottom panels, backrest panels, seat panels, and front guards | |
Installation of steering wheel, vehicle receiving and offline | |
Debugging |
Offline adjustment and repair |
Packaging & shipping |
Shippment |
FAO
1. What's the advantage of electric motorcycle?
You can easily drive it if you can drive a motor, and you don't need to get a license and pay parking fee.
2. What colors are available?
We have many color options, such as black, red, white, yellow, blue, silver, orange and so on, so we can make the colors based on your request.
3. Can you do your logo or brand on the electric motorcycle?
No problem, if you order 200pcs, we can do it for free, if you order less than that, we charge $500 for it at first, and you don't need to pay for it anymore in future order, when your orders reach 200pcs, we can refund this $500 to you.
4. Can I order some samples at first to see the quality?
No problem, if your order is less than 5 pcs, we need to charge some extra sample fee, the amount is based on your specific quantity, when your orders reach 200pcs, we can refund you the sample fee.
5. Can you deliver samples by DHL or Fedex?
Yes, we can deliver samples by DHL or Fedex, you just tell us your address, we will check the air freight fee for you, if you confirm, then we send by air for you, you can receive it faster than the way send by ship.
6. Can you change configuration for me?
No problem, we can change configuration based on your request.
7. What's your payment term?
Payment term is 30% TT in advance, balance against copy of BL.
But if sample order, we only accept 100 T/T in advance
Patent Certificate
http://www.tesmakjs.com/
